TGTech là nhà phân phối duy nhất sản phẩm này tại Việt Nam
Xuất xứ: POWER MnC – Hàn Quốc
Máy đo và điều tiết độ phẳng tôn cán nguội (Dạng tiếp xúc – Contact type shape measuring system) Shape Meter PSM-2000
1. Tính năng máy đo và điều tiết độ phẳng tự động: (Tương đương hoặc tối ưu hơn các tính năng của sản phẩm tương tự của ABB)
- Đo độ phẳng thép cán nguội tự động, sử dụng công nghệ AFC
- Hiển thị thông tin bề mặt tức thời ngay trong quá trình cán
- Tự động điều chỉnh tốc độ cán nguội (điều tiết độ phẳng tự động)
- Tự động tối ưu hóa sản phẩm cán theo yêu cầu đầu vào
- Độ phản hồi đáp ứng cao, cho tốc độ cán lên tới 4000 m/phút
- Dải kích thước sản phẩm theo yêu cầu:
- 0,005 mm – 0,5 mm (Foil Roll); dải độ rộng: 0,5m – 2,5m
- 0,5 mm – 10mm (Standard Roll); dải độ rộng: 0,5m – 2,5m
- Tuổi thọ: > 20 năm (kèm điều kiện bảo trì)
2. Kích thước hệ thống:
Đây là một hệ thống đo độ phẳng thép cán nguội tự động, cần được tích hợp vào hệ sản xuất thép cán nguội sẵn có. Do đó, kích thước hệ tuân theo yêu cầu cụ thể của từng hệ sản xuất.
3. Giá bán:
Theo sản phẩm cụ thể, khoảng giá xấp xỉ bằng 1/2 giá thiết bị ABB cùng chức năng
4) Yêu cầu đặt hàng:
Trước 1 tháng
5) Bảo hành:
1 năm chính hãng POWER MnC – Hàn Quốc
*) Với quý doanh nghiệp có sản xuất thép cán nóng HR, xin xem các thiết bị đo thép cán nóng tại đây.
Contact type shape measuring system: Shape Meter PSM-2000
• High performance FPGA meter High speed data acquisition device (500 kHz Sampling Speed)
• Semi-arithmetic System
• Strip force distribution data transmission via Ethernet
• Shape data service through OPC server
• Shape Meter logger function
• 2D and 3D graphics available
• Interlocking with PLC line
• Work Roll Bending Control
• Backup Roll Force Control (Tilting, Leveling)
• IMR Roll Shifting Control
• Zone Cooling Nozzle Control
• Active shape controller using shape meter profile provides control signal to PLC controlling each actuator (Work Roll, Backup Roll, IMR Roll, Zone Cooling)
• The stretching control of the plate in the width direction constant rolling rate
• The roll profile of the rolling mill coincides with the profile of the side plated through W/R, B/R and IMR control
*All specifications can be changed by customers’ requirements
Notices:
All rights reserved. No part of this publication may be reproduced, distributed, or transmitted in any form or by any means, including photocopying, recording, or other electronic or mechanical methods, without the prior written permission of the publisher, except in the case of brief quotations embodied in certain other noncommercial uses permitted by copyright law.
Đánh giá
Chưa có đánh giá nào.